User's Manual

Set the stream type, the video type, the bitrate type, the frame rate, the Max. bitrate, the video
encoding, and I Frame Interval.
Click Save to save the sengs aer the conguraon.
Note
The
funcons vary according to dierent models. Refers to the actual device for details.
14.6.9 Set Image Parameters
You can adjust the image parameters, video parameters, supplement parameters and capture
in
terval.
Steps
1.
Click Conguraon → Image .
2.
Congure the parameters to adjust the image.
Video Adjust(Video Standard)
Set the video frame rate when performing live view remotely. Aer changing the standard,
you should reboot the device to take eect.
PAL
25 frames per second. Suitable for mainland China, Hong Kong (China), the Middle East
countries, Europe countries, etc.
NTSC
30 frames per second. Suitable for the USA, Canada, Japan, Taiwan (China), Korea, the
Philippines, etc.
Image Adjustment
Drag the block or enter the value to adjust the live video's brightness, contrast, saturaon,
and sharpness.
Supplemen
t Light Parameters
Set the supplement light type, mode, start me and end me. You can also set the
brigh
tness.
Capture Interval
You can select the capture interval according to your actual needs.
3.
Click Default to restore the parameters to the default sengs.
14.6.10 Access Control Sengs
Set Authencaon Parameters
Click Conguraon → Access Con
trol → Authencaon Sengs .
DS-K1T320 Series Face
Recoginon Terminal User Manual
89