User's Manual

Note
The
funcons vary according to dierent models. Refers to the actual device for details.
Figure 14-8 Set Authencaon Parameters
Click Sa
ve to save the sengs aer the conguraon.
Terminal/Terminal Type/Terminal Model
Get terminal descripon. They are read-only.
Enable Authencaon Device
Enable the authencaon
funcon.
Authencaon
Select an
authencaon mode according to your actual needs from the drop-down list.
Connuous Face Recognion Interval
You can set the interval between 2 connuous recognion of a same person during the
authencaon. In the congured interval, Person A can only recognized once. If another person
(Person B) has recognized during the interval, Person A can recognized again.
Authencaon Interval
Y
ou can set the authencaon interval of the same person when authencang. The same
person can only authencate once in the congured interval. A second authencaon will be
failed.
Alarm of Max. Failed Aempts
Enable to report alarm when the card reading aempts reach the set value.
Max. Authencaon Failed Aempts
Enable to report alarm when the card reading aempts reach the set value.
DS-K1T320 Series Face
Recoginon Terminal User Manual
90