User's Manual

2.
On the Communicaon page, select Wired Network.
Figure 7-2 Wired Network Sengs
3.
Se
t IP Address, Subnet Mask, and Gateway.
-
Enable DHCP, and the system will assign IP address, subnet mask, and gateway automacally.
-
Disable DHCP, and you should set the IP address, subnet mask, and gateway manually.
Note
The device's IP address and the computer IP address should be in the same IP segment.
4.
Se
t the DNS parameters. You can enable Auto Obtain DNS, set the preferred DNS server and the
alternate DNS server.
7.2.2 Set Wi-Fi Parameters
You can enable the Wi-Fi funcon and set the Wi-Fi related parameters.
St
eps
Note
The
funcon should be supported by the device.
1.
Select Basic → Comm. (Communicaon) to enter the Communicaon
sengs page.
2.
On the Communicaon sengs page, select Wi-Fi.
DS-K1T320 Series Face
Recoginon Terminal User Manual
26