User's Manual

7.5.1 Authencate via Single Credenal
Set the user authencaon type before authencaon. For details, see Set Authencaon Mode .
Authencate
face, ngerprint, card or PIN.
Face
Face forward at the camera and start authencaon via face.
Fing
erprint
Place the enrolled ngerprint on the ngerprint module and start authencaon via ngerprint.
Card
Present the card on the card swiping area and start authencaon via card.
Note
The card can be normal IC card, or encrypted card.
PIN Code
En
ter the pin code to authencate via PIN code.
If authencaon completed, a prompt "Authencated" will pop up.
7.5.2 Authencate via Mulple Credenal
Before You Start
Set the user authencaon type before authencaon. For details, see
Set Authencaon Mode .
St
eps
1.
If the authencaon mode is Card and Face, Password and Face, Card and Password, Card and
Face and Fingerprint, authencate any credenal according to the instrucons on the live view
page.
Note
●
The c
ard can be normal IC card, or encrypted card.
2.
Aer the previous credenal is authencated,
connue authencate other credenals.
Note
●
F
or detailed informaon about scanning ngerprint, see Tips for Scanning Fingerprint.
●
For detailed informaon about authencang face, see Tips When Collecng/Comparing Face
Picture.
If
authencaon succeeded, the prompt "Authencated" will pop up.
DS-K1T320 Series Face
Recoginon Terminal User Manual
38