User's Manual

Congure the meout period for face recognion. If the face recognion me exceeds the
congured value, the device will prompt the face recognion meout.
Face with Mask Detecon
Aer enabling the face with mask detecon, the system will recognize the captured face with
mask picture. You can set face with mask1:N matching threshold, its ECO mode, and the
strategy.
None
If the person do not wear a face mask when authencang, the device will not prompt a
nocaon.
Reminder of Wearing
If the person do not wear a face mask when authencang, the device prompts a
nocaon and the door will open.
Must Wear
If the person do not wear a face mask when authencang, the device prompts a
nocaon and the door keeps closed.
Face with Mask & Face (1:1)
Set the matching value when authencang with face mask via 1:1 matching mode. The larger
the value, the smaller the false accept rate and the larger the false rejecon rate.
Face with Mask 1:N Matching Threshold
Set the matching threshold when authencang with face mask via 1:N matching mode. The
lar
ger the value, the smaller the false accept rate and the larger the false rejecon rate.
Fingerprint Security Level
You can set the security level of ngerprint. The higher the sucurity level you set, the lower the
F
alse Acceptance Rate (FAR) will be. The higher the security level you set, the lower the False
Rejecon Rate (FRR) will be.
Set Recognion Area
Tap Conguraon → Smart → Ar
ea Conguraon to enter the page.
Drag the blue frame in the live video to adjust the recognion area. Only the face within the area
can be recognized by the system.
Drag the slider to congure the eecve area of face recognion.
Tap Sa
ve to save the sengs.
8.4.11 Access Control Sengs
Set Door Parameters
Tap Conguraon → Access Control → Door Parameters .
DS-K1T320 Series Face
Recoginon Terminal User Manual
70