Quick Start Guide

DS-K1T331 Series
Face Recognition Terminal
Quick Start Guide
UD15536B
Installation Environment:
Avoid backlight, direct sunlight, and indirect sunlight.
For beer recognion, there should be light source in or near the installaon environment.
Appearance and Dimension:
1
2
Notes:
The installaon height here is the recommended height. You can change it according to your actual needs.
For easy installaon, drill holes on mounng surface according to the supplied mounng template.
Drill holes on the wall or other surface according to the mounng template and install the gang box.
Use two supplied screws (SC-KM4x25-SUS or KA4×22-SUS) to secure the mounng plate on the
gang box.
Route the cables through the cable hole of the mounng plate, and connect the terminals with the
external devices' cables.
Align the device with the mounng plate and hang the device on the mounng plate.
Use one supplied screw to secure the device and the mounng plate.
Installation with Gang Box: Base Mounting:
Note: The figures are for reference only.
Note: The power input should be 12 VDC, 1.5 A, 18 W.
1
Installation
2
Device Wiring (Normal)
2.1
Device
Mounting
Plate
Gang
Box Wall
3
4
Route the cables through the cable hole of the bracket, and connect the terminals
with external devices' cables.
Align the device two holes with the two buckles on the bracket.
Hang the device on the bracket and make sure the buckle in the middle of the bracket
is inserted in the groove on the device back.
Place the assembled device and bracket on the desk or other flats.
1
2
3
4
Direct Sunlight
Direct Sunlight
through Window
Backlight
Indirect Sunlight
through Window
Close to Light
Network Interface
2
3
4
1
Screen
CameraWhite Light Camera
microUSB
Interface
Tamper
Network Interface
Wiring Terminal
Debugging Port
110 mm
120 mm
23 mm
©2019 Hangzhou Hikvision Digital Technology Co., Ltd.
It includes instrucons on how to use the Product. The soware embodied in the
Product is governed by the user license agreement covering that Product.
About this Manual
This Manual is subject to domesc and internaonal copyright protecon. Hangzhou
Hikvision Digital Technology Co., Ltd. (“Hikvision”) reserves all rights to this manual.
This manual cannot be reproduced, changed, translated, or distributed, parally or
wholly, by any means, without the prior wrien permission of Hikvision.
Trademarks
and other Hikvision marks are the property of Hikvision and are
registered trademarks or the subject of applicaons for the same by Hikvision and/or
its affiliates. Other trademarks menoned in this manual are the properes of their
respecve owners. No right of license is given to use such trademarks without
express permission.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”,
WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY
QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD
PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR
AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR
INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTA-
TION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL
BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES
FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING
FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET
SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT
IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN
YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT
YOUR USE CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN
THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE
LAW, THE LATER PREVAILS.
Data Protecon
During the use of device, personal data will be collected, stored and processed. To
protect data, the development of Hikvision devices incorporates privacy by design
principles. For example, for device with facial recognion features, biometrics data is
stored in your device with encrypon method; for fingerprint device, only fingerprint
template will be saved, which is impossible to reconstruct a fingerprint image.
As data controller, you are advised to collect, store, process and transfer data in
accordance with the applicable data protecon laws and regulaons, including
without limitaon, conducng security controls to safeguard personal data, such as,
implemenng reasonable administrave and physical security controls, conduct
periodic reviews and assessments of the effecveness of your security controls.
Before you start:
According to the baseline on the mounng template, sck the mounng template on the wall or other
surface, 1.45 meters higher than the ground.
Note: Make sure the output of external power supply fulfils LPS.
Steps:
GND
GND
BTN
GND
C7
C6
C1
C2
C3
C4
C5
B1
B2
B3
Black
Orange
Yellow
Red
Black
Blue
Black
Green
White
Grey
Purple
Black
-
+
RS-485
Power Input
Door Lock
Group B
Group C
Power
Exit Button
Door
Contact
(Sensor)
Electric Dropbolt
Electric Strike