User's Manual

6.4 User Management
On the user management interface, you can add, edit, delete and search the user.
6.4.1 Add Administrator
The administrator can log in the device and congure the device parameters.
Steps
1. Long tap on the inial page and login.
2. Tap User → + to enter the Add User page.
3. Edit the employee ID.
Note
• The employee ID should be less than 32 characters. And it can be a combinaon of lower
leers, upper
leers, and numbers.
• The employee ID should not be duplicated.
4. T
ap the Name eld and input the user name on the so keyboard.
Note
• Numbers, upper case leers, lower case leers,
and special characters are allowed in the user
name.
• Up to 32 characters are allowed in the user name.
5. Oponal: Add a f
ace picture, cards, or password for the administrator.
Note
• For details about adding a face picture, see Add F
ace Picture .
• For details about adding a card, see Add Card .
• For details about adding a password, see Add Password .
6. Oponal: Se
t the administrator's authencaon type.
Note
For details about seng the
authencaon type, see Set Authencaon Mode .
7. Enable the Adminis
trator Permission funcon.
Administrator Permission
The user is the administrator. Except for the normal aendance funcon, the user can also
enter the Home page to operate aer authencang the permission.
8. Tap
to save the
sengs.
Face Recognion Terminal User Manual
38