User's Manual

Note
• If the person has mulple cards, separate the card No. with semicolon.
•
Items with asterisk are required.
• By default, the Hire Date is the current date.
7. Click to select the CSV le with person informaon.
8. Click Import t
o start imporng.
Note
• If a person No. already exists in the client's database, delete the exisng informaon before
imporng.
• You can import informaon of no more than 10,000 persons.
7.4.13 Import Person Pictures
Aer
imporng face pictures for the added persons to the client, the persons in the pictures can be
idened by an added face recognion terminal. You can either import person pictures one by
one, or import mulple pictures at a me according to your need.
Before You Start
Be sure to have imported person informaon to the client beforehand.
St
eps
1. Enter the Person module.
2. Select an added organizaon in the list, or click Add in the upper-le corner to add an
organizaon and then select it.
3. Click Import t
o open the Import panel and check Face.
4. Oponal: Enable Verify by Device to check whether face recognion device managed in the
client can recognize the face in the photo.
5. Click
to select a face picture le.
Note
• The (folder of) face pictures should be in ZIP format.
•
Each picture le should be in JPG format and should be no larger than 200 KB.
•
Each picture le should be named as "Person ID_Name". The Person ID should be the same
with that of the imported person informaon.
6. Click Import t
o start imporng.
The imporng progress and result will be displayed.
DS-K1T341 Series Face Recognion Terminal User Manual
85