User's Manual

Steps
Note
• If the person name stored in the device is empty, the person name will be lled with the issued
c
ard No. aer imporng to the client.
• The gender of the persons will be Male by default.
• If the card number or person ID (employee ID) stored on the device already exists in the client
database, the person with this card number or person ID will not be imported to the client.
1. En
ter Person module.
2. Select an organizaon to import the persons.
3. Click Get from Device.
4. Select the access control device from the drop-down list.
5. Click Get to start imporng the person informaon to the client.
The per
son informaon, including person details, person's ngerprint informaon (if
congured), and the linked cards (if congured), will be imported to the selected organizaon.
7.4.17 Move Persons to Another Organizaon
You can move the added persons to another organizaon if you need.
Be
fore You Start
• Make sure you have added at least two organizaons.
• Make sure you have imported person
informaon.
Steps
1. Enter Person module.
2. Select an organizaon in the le panel.
The persons under the organizaon will be displayed in the right panel.
3. Select the per
son to move.
4. Click Change Organizaon.
5. Select the organizaon to move persons to.
6. Click OK.
7.4.18 Issue Cards to Persons in Batch
The client provides a convenient way to issue cards to mulple persons in a batch.
St
eps
1. Enter Person module.
2. Click Batch Issue Cards.
All the added persons with no card issued will display.
3. Set the card issuing parameters. For details, refer to Set Card Issuing Parameters .
DS-K1T341 Series Face
Recognion Terminal User Manual
87