User's Manual

Capture
Capture a picture manually.
Note
The Cap
ture buon is available when the device supports capture funcon. The picture is
saved in the PC running the client. For seng the saving path, refer to Set File Saving Path in
the user manual of the client soware.
Result
The ic
on of the doors will change in real-me according to the operaon if the operaon is
succeeded.
7.9.2 Check Real-Time Access Records
The access records will display in real me, including card swiping records, face recognions
records, ngerprint comparison records, etc. You can view the person informaon and view the
picture captured during access.
Steps
1. Click Monitoring and select a group from the drop-down list on the upper-right corner.
The access records triggered at the doors in the selected group will display in real me. You can
vie
w the details of the records, including card No., person name, organizaon, event me, etc.
2. Oponal: Check the event type and event status so that these events will show in the list if the
events are detected. The events of unchecked type or status will not be displayed in the list.
3. Oponal: Check Sho
w Latest Event and the latest access record will be selected and displayed
at the top of the record list.
4. Oponal: Click the event to view the accessed person details, including person pictures
(captured picture and prole), person No., person name, organizaon, phone, contact address,
etc.
Note
You can double click the captured picture to enlarge it to view the details.
5. Oponal: Righ
t click on the column name of the access event table to show or hide the column
according to actual needs.
7.10 Event Center
You can congure the event of the added resources and set the linkage acons so that when the
event is triggered, the soware client can nofy the security personnel and record the event
details for checking aerwards.
DS-K1T341 Series Face Recognion Terminal User Manual
117