User's Manual

In the event management page, you can congure access control event. For details about access
control event conguraon, refer to Congure Linkage Acons for Access Control .
In the event center, you can view the real-me events and search the historical events. For details,
refer to View Real-Time Events and Search Historical Events .
7.10.1 Enable Receiving Events from Devices
Before the client can receive the event informaon from the device, you need to arm the device
rst.
Steps
1. Click → Tool → Device Arming Control open Device Arming Control page.
All the added devices display on this page.
2. In the Operaon column, turn on the switch to enable auto-arming, or click Arm All to arm all
the devices.
Figure 7-6 Device Arming Control
3. Vie
w the arming status of each device in the Arming Status column.
Result
The events of armed device(s) are automacally uploaded to the client when the event is
trig
gered.
7.10.2 View Real-Time Events
In the Real-me Event module of the event center page, you can view the real-me event
informaon, including event source, event me, priority, event key words, etc.
Be
fore You Start
Enable receiving events from devices before the client can receive event informaon from the
de
vice, see Enable Receiving Events from Devices for details.
DS-K1T341 Series Face Recognion Terminal User Manual
118