User's Manual

If you enable this funcon, the voice prompt is enabled in the device. You can hear the voice
prompt when operang in the device.
Upload Pictures aer Capturing
If you enable this funcon, the captured pictures will be sent to the client soware.
Save Captured Pictures
If you enable this funcon, the captured pictures will be saved.
3. Click Save.
7.12.12 Set Face Recognion Terminal Parameters
Click Main
tenance and Management → Device to enter the device list.
Press CTRL and click
to enter the remote conguraon page.
Click Other → F
ace Recognion Terminal Parameters and y
ou can congure the device
parameters.
Face Picture Database
Select Deep Learning as the face picture database.
Save Authencang Face Picture
If enabled, the c
aptured face picture when authencang will be saved on the device.
Work Mode
Set the device work mode as Access Control Mode. The access control mode is the device
normal mode. You should authencate your
credenal for accessing.
ECO Mode
Aer enabling the ECO mode, the device will use the IR camera to authencate faces in the low
light or dark environment. And you can set he ECO mode threshold, ECO mode (1:N), and ECO
mode (1:1).
ECO Mode (1:1)
Set the matching threshold when authencang via ECO mode 1:1 matching mode. The larger
the v
alue, the smaller the false accept rate and the larger the false rejecon rate.
ECO Mode (1:N)
Set the matching threshold when authencang via ECO mode 1:N matching mode. The larger
the value, the smaller the false accept rate and the larger the false rejecon rate.
E
CO Mode Threshold
When enabling the ECO mode, you can set the ECO mode’s threshold. The larger the value, the
easier the device entering the ECO mode. Available range: 0 to 8.
Click Save to save the sengs.
DS-K1T341 Series Face Recognion Terminal User Manual
148