User's Manual

7.13 Remote Conguraon via Client Soware
Congure device parameters remotely.
7.13.1 Check Device Informaon
Steps
1. Click Maintenance and Management → Device to enter the device list.
2. Press CTRL and click to enter the remote conguraon page.
3. Click System → Device Informaon and view the device basic informaon and the device
version informaon.
7.13.2 Edit Device Name
Click Maintenance and Management → Device to enter the device list.
Press CTRL and click to enter the remote conguraon page.
Click System → General to congure the device name and overwrite record les parameter.
Click Save.
7.13.3 Edit Time
Steps
1. Click Main
tenance and Management → Device to enter the device list.
2. Press CTRL and click
to enter the remote conguraon page.
3. Click S
ystem → Time to congure the me zone.
4. Oponal: Check Enable NTP and set the NTP server address, the NTP port, and the
synchronizaon interval.
5. Oponal: Check Enable DS
T and set the DST start me, end me and the bias.
6. Click Save.
7.13.4 Set System Maintenance
You can reboot the device remotely, restore the device to default sengs, import conguraon
le, upgrade the device, etc.
Steps
1. Click Maintenance and Management → Device to enter the device list.
2. Press CTRL and click
to enter the remote conguraon page.
3. Click S
ystem → System Maintenance .
4. Maintain the device.
DS-K1T341 Series Face Recognion Terminal User Manual
151