User's Manual

Reboot
The device starts reboong.
Restore Default Sengs
Restore the device sengs to the default ones, excluding the IP address.
Restore All
Restore the device parameters to the default ones. The device should be acvated aer
restoring.
Restore Part of Sengs
Restore all sengs except communicaon sengs and the remote user sengs to default
ones.
Import Conguraon File
Import the conguraon le from the local PC to the device.
Note
The
conguraon le contains the device parameters.
Export Conguraon File
Export the conguraon
le from the device to the local PC.
Note
The
conguraon le contains the device parameters.
5. R
emotely upgrade the device.
1) In the Remote Upgrade part, select an upgrade type.
Note
• You need to set the device ID before upgrading if you select Controller Upgrade File as the
r
emote upgrade type.
• Only the card reader that connected via RS-485 protocol supports upgrading.
2) Click ... t
o select an upgrade le.
3) Click Upgrade to start upgrading.
Note
Do not power o
during the upgrading.
7.13.5 Manage User
Steps
1. Click Main
tenance and Management → Device to enter the device list.
2. Press CTRL and click
to enter the remote conguraon page.
3. Click S
ystem → User .
DS-K1T341 Series Face
Recognion Terminal User Manual
152