User's Manual

4. Click Add to add the user (Do not support by the elevator controller.).
5. Oponal: Select a user in the user lis
t and click Edit to edit the user.
You are able to edit the user password, the IP address, the MAC address and the user
permission.
6. Click OK.
7.13.6 Set Security
Steps
1. Click Maintenance and Management → Device to enter the device list.
2. Press CTRL and click
to enter the remote conguraon page.
3. Click S
ystem → Security .
4. Select the encrypon mode in the dropdown list.
5. You can select Compable Mode or Encrypon Mode.
Compable Mode
The user informaon vericaon is compable with the old client soware version when
log
ging in.
Encrypon Mode
High security le
vel during the user informaon vericaon when logging in.
6. Oponal: Check Enable SSH.
7. Click Save.
7.13.7 Congure Advanced Network
Click Main
tenance and Management → Device to enter the device list.
Press CTRL and click
to enter the remote conguraon page.
Click Ne
twork → Advanced Sengs and you can congure the DNS IP address 1 and the DNS IP
addr
ess.
Click Save to save the sengs.
7.13.8 Congure SIP Parameters
Set the master staon's IP address and the SIP server's IP address. Aer seng the parameters,
you can communicate among the access control device, door staon, indoor staon, master
staon, and the
plaorm.
Note
Only the access control device and other devices or systems (such as door staon, indoor staon,
master staon,
plaorm) are in the same IP segment, the two-way audio can be performed.
DS-K1T341 Series Face Recognion Terminal User Manual
153