User's Manual

5. Select a supplement light mode from the drop-down list.
6. Oponal: If the supplemen
t light mode is Auto, you can set the supplement light brightness.
7. Click Save to save the sengs.
7.13.11 Congure Video and Audio Parameters
You can set the device camera's image quality, resoluon and other parameters.
Steps
1. Click Maintenance and Management → Device to enter the device list.
2. Press CTRL and click
to enter the remote conguraon page.
3. Click Imag
e → Video & Audio to enter the sengs page.
4. Set the device camera's parameters, including the stream type, the bitrate type, the video
quality, the frame rate, the audio encoding type, the video type, the bitrate, the resoluon, and
the I frame interval.
5. Click Save.
7.13.12 Set Room No.
Set the device type, community No., building No., oor No., and unit No., and room No.
Click Maintenance and Management → Device to enter the device list.
Press CTRL and click
to enter the remote conguraon page.
Click Other → De
vice Room No. and Set the device type, community No., building No., oor No.,
and unit No., and r
oom No.
7.13.13 Congure Video and Audio Parameters
You can set the device camera's image quality, resoluon and other parameters.
Steps
1. Click Maintenance and Management → Device to enter the device list.
2. Press CTRL and click
to enter the remote conguraon page.
3. Click Imag
e → Video & Audio to enter the sengs page.
4. Set the device camera's parameters, including the stream type, the bitrate type, the video
quality, the frame rate, the audio encoding type, the video type, the bitrate, the resoluon, and
the I fr
ame interval.
5. Click Save.
7.13.14 Congure Volume Input or Output
Steps
1. Click Main
tenance and Management → Device to enter the device list.
DS-K1T341 Series Face
Recognion Terminal User Manual
156