User's Manual

Note
• The card No. cannot be empty.
•
Up to 20 characters are allowed in the card No.
• The card No. cannot be duplicated.
8. Oponal: Enable the Dur
ess Card funcon. The added card
When the user authencates by swiping this duress card, the device will upload an duress card
event to the client soware.
9. Enable or disable the Administrator Permission funcon.
Enable Administrator Permission
The user is the administrator. Except for the normal aendance funcon, the user can also
enter the Home page to operate aer authencang the permission.
Disable Adminis
trator Permission
The User is the normal user. The user can only authencate or take aendance on the inial
page.
10. Tap
to save the
sengs.
6.4.4 Add Password
Add a password for the user and the user can authencate via the password.
St
eps
1. Long tap on the inial page and log in the backend.
2. Tap User → + to enter the Add User page.
3. Tap the Employee ID. eld and edit the employee ID.
Note
• The employee ID should be less than 32 characters. And it can be a combinaon of lower
leers, upper
leers, and numbers.
• The employee ID should not be duplicated.
4. T
ap the Name eld and input the user name on the so keyboard.
Note
• Numbers, upper case leers, lower case leers,
and special characters are allowed in the user
name.
• Up to 32 characters are allowed in the user name.
5. T
ap the Password eld and create a password and conrm the password.
DS-K1T341 Series Face
Recognion Terminal User Manual
42