User's Manual

Face
Face forward at the camera and start authencaon via face.
Card
Present the card on the card presenng area and start authencaon via card.
Note
The card can be normal IC card, or encrypted card.
If authencaon completed, a prompt "Authencated" will pop up.
6.6.2 Authencate via Mulple
Credenal
Before You Start
Set the user authencaon type before authencaon. For details, see Set Authencaon Mode .
Steps
1. If the authencaon mode is Card and Face, Password and Face, Card and Password,
authencate any credenal according to the instrucons on the live view page.
Note
The card can be normal IC card, or encrypted card.
2. Aer the previous credenal is authencated,
connue authencate the other credenal.
Note
• For detailed informaon about scanning ngerprint, see Tip
s for Scanning Fingerprint.
• For detailed informaon about authencang face, see Tips When Collecng/Comparing Face
Picture.
If authencaon succeeded, the prompt "Authencated" will pop up.
6.7 System Sengs
On the System
Sengs page, you can set the system basic parameters, the face parameters, and
upgrade the rmware.
6.7.1 Set Basic Parameters
You can set the community No., building No., the unit No., voice prompt, voice volume, and
applicaon.
On the Home page, tap S
ystem (System Sengs) to enter the System Sengs page.
DS-K1T341 Series Face Recognion Terminal User Manual
47