User's Manual

Note
The
funcon should be used cooperavely with me and aendance funcon on the client
soware.
6.8.1 Disable Aendance Mode via Device
Disable the aendance mode and the system will not display the aendance status on the inial
page.
T
ap T&A Status to enter the T&A Status page.
Figure 6-13 Disable
Aendance Mode
Set the Aendance Mode as Disable. And tap
.
Y
ou will not view or congure the aendance status on the inial page. And the system will follow
the aendance rule that congured on the plaorm.
6.8.2 Set Auto Aendance via Device
Set the
aendance mode as auto, and you can set the aendance status and its available schedule.
The system will automacally change the aendance status according to the congured
parameters.
Before You Start
Add at least one user, and set the user's
authencaon mode. For details, see User Management.
Steps
1. Tap T&A Status to enter the T&A Status page.
2. Set the
Aendance Mode as Auto.
DS-K1T341 Series Face Recognion Terminal User Manual
52