User's Manual

Add Online Device
The acve online devices in the same local subnet with the client soware will be displayed on the
Online Device area.
Note
• You can click R
efresh per 60s to refresh the informaon of the online devices.
• SADP log funcon can be enabled or disabled by right-clicking Online Device.
Add Single Online Device
You can add single online device to the client soware.
Steps
1. En
ter the Device Management module.
2. Oponal: Click
on the right of De
vice Management and select Device.
3. Click Online Device to show the online device area.
The searched online devices are displayed in the list.
4. Select an online device from the Online Device area.
Note
For the inacve
device, you need to create the password for it before you can add the device
properly. For detailed steps, refer to Acvaon .
5. Click Add t
o open the device adding window.
6. Enter the required informaon.
Name
Enter a descripve name for the device.
Address
The IP address of the device is obtained automacally in this adding mode.
P
ort
The port number is obtained automacally.
User Name
B
y default, the user name is admin.
Password
Enter the device password.
DS-K1T341 Series Face Recognion Terminal User Manual
68