User's Manual

3. Click Add to open the adding person window.
The Person ID will be generated automacally.
4. En
ter the basic informaon including person name, gender, tel, email address, etc.
5. Oponal: Set the eecve period of the person. Once expired, the credenals and access
control sengs of the person will be invalid and the person will have no authorizaon to access
the doors\oors.
Example
For example, if the person is a visitor, his/her eecve period may be short and temporary.
6. Conrm to add the person.
-
Click Add to add the person and close the Add Person window.
-
Click Add and New to add the person and connue to add other persons.
7.4.3 Issue a Card to One Person
When adding person, you can issue a card with a unique card number to the person as a
credenal.
Aer issued, the person can access the doors which he/she is authorized to access by
swiping the card on the card reader.
Steps
Note
Up to ve
cards can be issued to one person.
1. En
ter Person module.
2. Select an organizaon in the organizaon list to add the person and click Add.
Note
Enter the person's basic informaon rst. For details about conguring person's basic
informaon, refer to Congure Basic Informaon .
3. In the
Credenal → Card panel, click +.
4. Enter the card number.
-
Enter the card number manually.
-
Place the card on the card enrollment staon or card reader and click R
ead to get the card
number. The card number will display in the Card No. eld automacally.
Note
You need to click Sengs to set the card issuing mode and related parameters rst. For
de
tails, refer to Set Card Issuing Parameters .
5. Select the c
ard type according to actual needs.
Normal Card
The card is used for opening doors for normal usage.
DS-K1T341 Series Face
Recognion Terminal User Manual
79