User's Manual

Parameter Descripon
Set the matching value when authencang with face mask via ECO
mode 1:N matching mode. The larger the value, the smaller the false
accept rate and the larger the false rejecon rate.
Face with Mask
Detecon
Aer enabling the face with mask detecon, the system will recognize
the captured face with mask picture. You can set face with mask & face
1:N level and the strategy.
Strategy
Set the None, Reminder of Wearing and Must Wear strategy.
Reminder of Wearing
If the person do not wear a face mask when
authencang, the
device prompts a nocaon and the door will open.
Must Wear
If the person do not wear a face mask when authencang, the
device prompts a
nocaon and the door keeps closed.
None
If the person do not wear a face mask when authencang, the
device will not prompt a nocaon.
Face with Mask & Face (1:1)
Set the matching value when authencang with face mask via 1:1
matching mode. The larger the value, the smaller the false accept rate
and the larger the false
rejecon rate.
Face with Mask & Face (1:N)
Set the matching value when authencang with face mask via 1:N
matching mode. The larger the value, the smaller the false accept rate
and the larger the false
rejecon rate.
7.8 Set Access Control Parameters
You can set the access control permissions, including the funcons of authencaon mode, enable
NFC card, enable M1 card, door contact, open
duraon (s) and authencaon interval (s).
On the Home page, tap ACS (Access Control Sengs) to enter the Access Control Sengs page.
Edit the access control parameters on this page.
DS-K1T343 Series Face Recognion Terminal User Manual
52