User's Manual

Table Of Contents

If the card is M1 card, and if you need to enable the M1 Card Encrypon funcon, you should

enable this funcon and select the sector of the card to encrypt.

Remote Mode: Issue Card by Card Reader

Select an access control device added in the client and swipe the card on its card reader to read

the card number.

9.5 Congure Schedule and Template

You can congure the template including holiday and week schedule. Aer seng the template,

you can adopt the

congured template to access groups when seng the access groups, so that

the access group will take eect in the me duraons of the template.

Note

For access group sengs, refer to Set Access Group to Assign Access Authorizaon to Persons .

9.5.1 Add Holiday

You can create holidays and set the days in the holidays, including start date, end date, and holiday

duraon in one day.

Steps

Note

You can add up to 64 holidays in the soware system.

Click Access Control → Schedule → Holiday to enter the Holiday page.

Click Add on the

le panel.

Create a name for the holiday.

Oponal: Enter the descripons or some nocaons of this holiday in the Remark box.

Add a holiday period to the holiday list and

congure the holiday duraon.

Note

Up to 16 holiday periods can be added to one holiday.

1) Click Add in the Holiday List eld.

2) Drag the cursor to draw the me duraon, which means in that duraon of me, the

congured access group is acvated.

Note

Up to 8 me duraons can be set to one holiday period.

3) Oponal: Perform the following operaons to edit the me duraons.

Access Control Terminal User Manual