User's Manual

Note
●
If you change the No., you should reboot the device.
●
The main door staon No. is 0, and the sub door staon No. ranges from 1 to 16.
Community No.
Set the device community No.
Building No.
Set the device building No.
Unit No.
Set the device unit No.
Note
If you change the No., you should reboot the device.
If set the device type as Outer Door Staon, you can set the period No., outer door staon No.,
and community No.
Outer Door
Staon No.
If you select outer door staon as the device type, you should enter a number between 1 and
99.
Note
If you change the No., you should reboot the device.
Community No.
Set the device community No.
Session
Sengs
Enable the communicaon between door staon, main staon, and video intercom server.
Steps
1.
Click Conguraon → Intercom → Session Sengs to enter the sengs page.
2.
Set
registraon password, main staon IP, private server IP and enable Protocol 1.0.
Registraon Password
Acvaon password of the main staon.
Main Staon IP
IP address of the main staon.
Private Server IP
IP address of the private server.
Enable Protocol 1.0
Access Control Terminal User Manual
44