User's Manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Appearance
- Chapter 3 Installation
- Chapter 4 Terminal Connection
- Chapter 5 Activation
- Chapter 6 Basic Operation
- Chapter 7 Client Operation
- 7.1 User Registration and Login
- 7.2 System Configuration
- 7.3 Access Control Management
- 7.3.1 Adding Access Control Device
- 7.3.2 Viewing Device Status
- 7.3.3 Editing Basic Information
- 7.3.4 Network Settings
- 7.3.5 Capture Settings
- 7.3.6 RS-485 Settings
- 7.3.7 Wiegand Settings
- 7.3.8 Setting Multiple NICs
- 7.3.9 Setting Face Recognition Terminal
- 7.3.10 Remote Configuration
- Checking Device Information
- Editing Device Name
- Editing Time
- Setting System Maintenance
- Configuring RS-485 Parameters
- Managing User
- Setting Security
- Configuring Network Parameters
- Configuring Upload Method
- Configuring Network Center
- Configuring Advanced Network
- Configuring Wi-Fi
- Configuring the Network and SIP Parameters
- Configuring Relay Parameters
- Configuring Access Control Parameters
- Configuring Face Recognition Terminal Parameters
- Configuring Face Picture Parameters
- Configuring Supplement Light Parameters
- Configuring Video and Audio Parameters
- Configuring Volume Input or Output
- Operating Relay
- Viewing Relay Status
- 7.4 Organization Management
- 7.5 Person Management
- 7.5.1 Adding Person
- Adding Person (Basic Information)
- Adding Person (Detailed Information)
- Adding Person (Permission)
- Adding Person (Card)
- Adding Person (Face Picture)
- Adding Person (Fingerprint)
- Adding Person (Attendance Rule)
- Importing Person Information
- Importing Person Pictures
- Exporting Person Information
- Getting Person Information from Access Control Device
- 7.5.2 Managing Person
- 7.5.3 Issuing Card in Batch
- 7.5.1 Adding Person
- 7.6 Schedule and Template
- 7.7 Permission Configuration
- 7.8 Advanced Functions
- 7.9 Searching Access Control Event
- 7.10 Access Control Event Configuration
- 7.11 Door Status Management
- 7.12 Live View
- 7.13 Arming Control
- 7.14 Time and Attendance
- Appendix A Tips for Scanning Fingerprint
- Appendix B Tips When Collecting/Comparing Face Picture
- B.1 Positions (Recommended Distance:0.5 m)
- B.2 Expression
- B.3 Posture
- B.4 Size
- Appendix C Tips for Installation Environment
- Appendix D Relationship Between Wake-up Distance and Environment
- Appendix E Dimension
607 Series Face Recognition Terminal User Manual
126
status, synchronization, etc.
Two-way Audio
Two-way audio function enables the voice talk of the camera. You can get not only the live video
but also the real-time audio from the camera. If the device has multiple two-way audio channels,
you can select the channel to start two-way audio.
The two-way audio can be used for only one camera at one time.
Note: Hik-Connect device doesn’t support selecting channel during two-way audio.
Camera Status
The camera status, such as recording status, signal status, connection number, etc., can be
detected and displayed for check. The status information refreshes every 10 seconds.
Synchronization
The synchronization function provides a way to synchronize the device clock with the PC which
runs the client software.
7.12.4 Controlling Door During Live View
Purpose:
You can control the door during live view.
Steps:
1. Right click on the live view window to pop up the right-click menu.
2. Click Link to Access Control Point to pop up the Set Linked Access Control Point dialog.
3. Check the Enable checkbox to enable the linkage function.
4. Select access control point from the dropdown list.
5. Click OK to save the settings.
You can also click Cancel to cancel the operation.
6. Get the stream again (double-click the camera) to make the settings effective.
Four door control buttons will appear on the toolbar during live view.
The following table shows the descriptions of the four buttons.
Button
Description
Open the door.
Close the door.
Remain open.