User's Manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Appearance
- Chapter 3 Installation
- Chapter 4 Terminal Connection
- Chapter 5 Activation
- Chapter 6 Basic Operation
- Chapter 7 Client Operation
- 7.1 User Registration and Login
- 7.2 System Configuration
- 7.3 Access Control Management
- 7.3.1 Adding Access Control Device
- 7.3.2 Viewing Device Status
- 7.3.3 Editing Basic Information
- 7.3.4 Network Settings
- 7.3.5 Capture Settings
- 7.3.6 RS-485 Settings
- 7.3.7 Wiegand Settings
- 7.3.8 Setting Multiple NICs
- 7.3.9 Setting Face Recognition Terminal
- 7.3.10 Remote Configuration
- Checking Device Information
- Editing Device Name
- Editing Time
- Setting System Maintenance
- Configuring RS-485 Parameters
- Managing User
- Setting Security
- Configuring Network Parameters
- Configuring Upload Method
- Configuring Network Center
- Configuring Advanced Network
- Configuring Wi-Fi
- Configuring the Network and SIP Parameters
- Configuring Relay Parameters
- Configuring Access Control Parameters
- Configuring Face Recognition Terminal Parameters
- Configuring Face Picture Parameters
- Configuring Supplement Light Parameters
- Configuring Video and Audio Parameters
- Configuring Volume Input or Output
- Operating Relay
- Viewing Relay Status
- 7.4 Organization Management
- 7.5 Person Management
- 7.5.1 Adding Person
- Adding Person (Basic Information)
- Adding Person (Detailed Information)
- Adding Person (Permission)
- Adding Person (Card)
- Adding Person (Face Picture)
- Adding Person (Fingerprint)
- Adding Person (Attendance Rule)
- Importing Person Information
- Importing Person Pictures
- Exporting Person Information
- Getting Person Information from Access Control Device
- 7.5.2 Managing Person
- 7.5.3 Issuing Card in Batch
- 7.5.1 Adding Person
- 7.6 Schedule and Template
- 7.7 Permission Configuration
- 7.8 Advanced Functions
- 7.9 Searching Access Control Event
- 7.10 Access Control Event Configuration
- 7.11 Door Status Management
- 7.12 Live View
- 7.13 Arming Control
- 7.14 Time and Attendance
- Appendix A Tips for Scanning Fingerprint
- Appendix B Tips When Collecting/Comparing Face Picture
- B.1 Positions (Recommended Distance:0.5 m)
- B.2 Expression
- B.3 Posture
- B.4 Size
- Appendix C Tips for Installation Environment
- Appendix D Relationship Between Wake-up Distance and Environment
- Appendix E Dimension
607 Series Face Recognition Terminal User Manual
21
2. Configure the network parameters, including IP Address, Subnet Mask, Gateway, and DHCP.
Note: The device’s IP address and the computer IP address should be in the same network
segment.
3. Tap √ to save the network parameters.
Setting Wi-Fi Parameters
Purpose:
You can enable the Wi-Fi function and set the Wi-Fi related parameters.
Steps:
1. On the Communication Settings page, tap Wi-Fi to enter the Wi-Fi tab.
2. Tap to enable the Wi-Fi function.
The icon will turns to and all searched Wi-Fi will be listed in the Wi-Fi list.
3. Select a Wi-Fi in the list to enter the Wi-Fi parameters settings page.
4. Select an IP mode.
If selecting Static, you should input the Wi-Fi password, IP address, subnet mask and gateway.
If selecting Dynamic, you should input the Wi-Fi password.