User's Manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Appearance
- Chapter 3 Installation
- Chapter 4 Terminal Connection
- Chapter 5 Activation
- Chapter 6 Basic Operation
- Chapter 7 Client Operation
- 7.1 User Registration and Login
- 7.2 System Configuration
- 7.3 Access Control Management
- 7.3.1 Adding Access Control Device
- 7.3.2 Viewing Device Status
- 7.3.3 Editing Basic Information
- 7.3.4 Network Settings
- 7.3.5 Capture Settings
- 7.3.6 RS-485 Settings
- 7.3.7 Wiegand Settings
- 7.3.8 Setting Multiple NICs
- 7.3.9 Setting Face Recognition Terminal
- 7.3.10 Remote Configuration
- Checking Device Information
- Editing Device Name
- Editing Time
- Setting System Maintenance
- Configuring RS-485 Parameters
- Managing User
- Setting Security
- Configuring Network Parameters
- Configuring Upload Method
- Configuring Network Center
- Configuring Advanced Network
- Configuring Wi-Fi
- Configuring the Network and SIP Parameters
- Configuring Relay Parameters
- Configuring Access Control Parameters
- Configuring Face Recognition Terminal Parameters
- Configuring Face Picture Parameters
- Configuring Supplement Light Parameters
- Configuring Video and Audio Parameters
- Configuring Volume Input or Output
- Operating Relay
- Viewing Relay Status
- 7.4 Organization Management
- 7.5 Person Management
- 7.5.1 Adding Person
- Adding Person (Basic Information)
- Adding Person (Detailed Information)
- Adding Person (Permission)
- Adding Person (Card)
- Adding Person (Face Picture)
- Adding Person (Fingerprint)
- Adding Person (Attendance Rule)
- Importing Person Information
- Importing Person Pictures
- Exporting Person Information
- Getting Person Information from Access Control Device
- 7.5.2 Managing Person
- 7.5.3 Issuing Card in Batch
- 7.5.1 Adding Person
- 7.6 Schedule and Template
- 7.7 Permission Configuration
- 7.8 Advanced Functions
- 7.9 Searching Access Control Event
- 7.10 Access Control Event Configuration
- 7.11 Door Status Management
- 7.12 Live View
- 7.13 Arming Control
- 7.14 Time and Attendance
- Appendix A Tips for Scanning Fingerprint
- Appendix B Tips When Collecting/Comparing Face Picture
- B.1 Positions (Recommended Distance:0.5 m)
- B.2 Expression
- B.3 Posture
- B.4 Size
- Appendix C Tips for Installation Environment
- Appendix D Relationship Between Wake-up Distance and Environment
- Appendix E Dimension
607 Series Face Recognition Terminal User Manual
46
Note: After adding the device, you should check the device arming status in Tool – Device Arming
Control. If the device is not armed, you should arm it, or you will not receive the real-time events
via the client software. For details about device arming control, refer to 7.13 Arming Control.
.
Creating Password
Purpose:
For some devices, you are required to create the password to activate them before they can be
added to the software and work properly.
Note: This function should be supported by the device.
Steps:
1. Enter the Device Management page.
2. On the Device for Management or Online Device area, check the device status (shown on
Security column) and select an inactive device.
3. Click the Activate button to pop up the Activation interface.
4. Create a password in the password field, and confirm the password.
STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong password
of your own choosing (using a minimum of 8 characters, including upper case letters, lower