User's Manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Appearance
- Chapter 3 Installation
- Chapter 4 Terminal Connection
- Chapter 5 Activation
- Chapter 6 Basic Operation
- Chapter 7 Client Operation
- 7.1 User Registration and Login
- 7.2 System Configuration
- 7.3 Access Control Management
- 7.3.1 Adding Access Control Device
- 7.3.2 Viewing Device Status
- 7.3.3 Editing Basic Information
- 7.3.4 Network Settings
- 7.3.5 Capture Settings
- 7.3.6 RS-485 Settings
- 7.3.7 Wiegand Settings
- 7.3.8 Setting Multiple NICs
- 7.3.9 Setting Face Recognition Terminal
- 7.3.10 Remote Configuration
- Checking Device Information
- Editing Device Name
- Editing Time
- Setting System Maintenance
- Configuring RS-485 Parameters
- Managing User
- Setting Security
- Configuring Network Parameters
- Configuring Upload Method
- Configuring Network Center
- Configuring Advanced Network
- Configuring Wi-Fi
- Configuring the Network and SIP Parameters
- Configuring Relay Parameters
- Configuring Access Control Parameters
- Configuring Face Recognition Terminal Parameters
- Configuring Face Picture Parameters
- Configuring Supplement Light Parameters
- Configuring Video and Audio Parameters
- Configuring Volume Input or Output
- Operating Relay
- Viewing Relay Status
- 7.4 Organization Management
- 7.5 Person Management
- 7.5.1 Adding Person
- Adding Person (Basic Information)
- Adding Person (Detailed Information)
- Adding Person (Permission)
- Adding Person (Card)
- Adding Person (Face Picture)
- Adding Person (Fingerprint)
- Adding Person (Attendance Rule)
- Importing Person Information
- Importing Person Pictures
- Exporting Person Information
- Getting Person Information from Access Control Device
- 7.5.2 Managing Person
- 7.5.3 Issuing Card in Batch
- 7.5.1 Adding Person
- 7.6 Schedule and Template
- 7.7 Permission Configuration
- 7.8 Advanced Functions
- 7.9 Searching Access Control Event
- 7.10 Access Control Event Configuration
- 7.11 Door Status Management
- 7.12 Live View
- 7.13 Arming Control
- 7.14 Time and Attendance
- Appendix A Tips for Scanning Fingerprint
- Appendix B Tips When Collecting/Comparing Face Picture
- B.1 Positions (Recommended Distance:0.5 m)
- B.2 Expression
- B.3 Posture
- B.4 Size
- Appendix C Tips for Installation Environment
- Appendix D Relationship Between Wake-up Distance and Environment
- Appendix E Dimension
607 Series Face Recognition Terminal User Manual
40
completely, authenticate the face when the prompt “Continue to authenticate” pops up.
If authentication succeeded, the prompt “Authenticated” will pop up.
Notes:
For better face authentication, the user height should between 140 cm and 190 cm and the
distance between the user and the device should be between 30 cm and 100 cm.
For detailed information about scanning fingerprint, see Appendix A Tips for Scanning
Fingerprint.
For detailed information about authenticating face, see Appendix B Tips When
Collecting/Comparing Face Picture.
6.7.2 Authenticating via 1:N Matching
If the authentication mode is Face, position the face looking at the camera to start face
authentication.
If authentication completed, a prompt “Authenticated” will pop up.
6.7.3 Authenticating via 1:1 Matching and 1:N Matching
Steps:
1. If the authentication mode is Fingerprint and Face, authenticate fingerprint first according to
the prompt on the device screen.
The device will compare the fingerprint with the fingerprint information in the device database
(1:N Matching).
If authentication completed, a prompt “Continue to authenticate” will pop up.
2. Front the face looking at the camera to start face authentication.
The device will compare the captured face picture with the user information gained from the
last step (1:1 Matching).
If authentication completed, a prompt “Authenticated” will pop up.
Notes:
For better face authentication, the user height should between 140 cm and 190 cm and the
distance between the user and the device should be between 30 cm and 100 cm.
For detailed information about scanning fingerprint, see Appendix A Tips for Scanning
Fingerprint.
For detailed information about authenticating face, see Appendix B Tips When
Collecting/Comparing Face Picture.
6.8 Two-way Audio
Purpose:
After adding the device to the iVMS-4200 client software, you can call the device from the client
software, call the master station from the device, call the client software from the device, or call
the indoor station from the device.