User's Manual

Steps
1. Enter the administrator's name and tap Next.
2. Select a credenal to add.
-
: Face forward at the camera. Make sure the face is in the face recognion area. Click
to capture and click to conrm.
-
: Press your nger according to the instrucons on the device screen. Click to conrm.
-
: Enter the card No. or present card on the card presenng area. Click OK.
3. Click OK.
Y
ou will enter the authencaon page.
Scan QR code to authencate.
Note
The QR code can be obtained from the visitor terminal.
• Enter the device room No. and tap OK t
o call.
• Tap
to call the center.
Note
The device should be added to the center, or the calling operaon will be failed.
Enter password to authencate.
Note
You can congure
those shortcut keys displayed on the screen. For details, see Basic Sengs .
6.3 Login
Login the device backend to set the device basic parameters.
6.3.1 Login by Administrator
If you have added an administrator for the device, only the administrator can login the device for
de
vice operaon.
Steps
1. Long t
ap on the inial page for 3 s and slide to the le/right by following the gesture to enter
the admin login page.
DS-K1T642 Series Face
Recognion Terminal User Manual
17