User's Manual

8.10 Event Center
In the Event Center, you can view the real-me events, search the historical events and view the
pop-up alarm informaon.
Before the client can receive the event informaon from the device, you need to arm the device
rst. For details, refer to Enable Receiving Events from Devices .
Before the you can view the pop-up alarm informaon, you need to enable alarm triggered pop-up
image in the event center. For details, refer to .
8.10.1 Enable Receiving Events from Devices
Before the client can receive the event informaon from the device, you need to arm the device
rst.
Steps
1. Click → Tool → Device Arming Control open Device Arming Control page.
All the added devices display on this page.
2. In the
Operaon column, turn on the switch to enable auto-arming, or click Arm All to arm all
the devices.
Figure 8-6 Device Arming Control
3. View the arming status of each device in the Arming Status column.
Result
The events of armed device(s) are
automacally uploaded to the client when the event is
triggered.
DS-K1T642 Series Face Recognion Terminal User Manual
107