User's Manual

Congure Report Display
You can congure display contents displayed in the aendance report, such as the company name,
logo, date format,
me format, and mark.
Steps
1. Enter Time &
Aendance module.
2. Click
Aendance Stascs → Report Display .
3. Set the display
sengs for aendance report.
Company Name
Enter a company name to display the name in the report.
Date Format / Time Format
Set the date format and me format according to the actual needs.
Aendance Status Mark in Report
Enter the mark and select the color. The related elds of aendance status in the report will
display with the mark and color.
Weekend Mark in Report
Enter the mark and select the color. The weekend elds in the report will display with the
mark and color.
4. Click Save.
8.11.2 Add Timetable
You can add the metable for the shi schedule.
Steps
1. Click Time & Aendance → Timetable to enter metable sengs window.
2. Click Add to enter Add Timetable page.
3. Create a name for the
metable.
4. Select calculaon method.
First In & Last Out
The rst check-in me is recorded as start work me and the last check-out me is recorded
as the end-work
me.
Each Check-In/Out
Each check-in me and check-out me is valid and the sum of all periods between adjacent
check-in and check-out me will be recorded as the valid working duraon.
You need to set Valid Auth. Interval for this calculaon method. For example, if the interval
between card swiping of the same card is less than the set value, the card swiping is invalid.
5. Oponal: Set Enable T&A Status switch to on to calculate according to aendance status of the
device.
DS-K1T642 Series Face Recognion Terminal User Manual
118