User's Manual

6. Set the related
aendance me.
Start/End-Work Time
Set the start-work me and end-work-me.
Valid Check-in/out Time
Set the me period during which the check-in or check-out is valid.
Calculated as
Set the duraon calculated as the actual work duraon.
Late/Early Leave Allowable
Set the me period for late or early leave.
7. Oponal: Select break me to exclude the duraon from work hours.
Note
You can click Sengs to manage break me. For more details about conguring break me,
refer to Congure Break Time .
8. Click Save to add the metable.
9. Oponal: Perform one or more following operaons aer adding metable.
Edit Timetable
Select a metable from the list to edit related informaon.
Delete Timetable Select a metable from the list and click Delete to delete it.
8.11.3 Add Shi
You can add the shi for the shi schedule.
Before You Start
Add a metable rst. See Add Timetable for details.
Steps
1. Click Time &
Aendance → Shi to enter shi sengs page.
2. Click Add to enter Add Shi page.
3. Enter the name for shi.
4. Select the shi period from the drop-down list.
5. Select the added metable and click on the me bar to apply the metable.
DS-K1T642 Series Face Recognion Terminal User Manual
119