User's Manual

Table Of Contents

Steps

1. Enter the administrator's name and tap Next.

2. Select a

credenal to add.

: Face forward at the camera. Make sure the face is in the face recognion area. Click

to capture and click to conrm.

: Press your nger according to the instrucons on the device screen. Click to conrm.

: Enter the card No. or present card on the card presenng area. Click OK.

3. Click OK.

You will enter the

authencaon page.

Scan QR code to authencate.

Note

The QR code can be obtained from the visitor terminal.

• Enter the device room No. and tap OK to call.

• Tap to call the center.

Note

The device should be added to the center, or the calling operaon will be failed.

Enter password to authencate.

Note

You can congure those shortcut keys displayed on the screen. For details, see Basic Sengs .

6.3 Login

6.3.1 Login by Administrator

If you have added an administrator for the device, only the administrator can login the device for

device

operaon.

Steps

1. Long tap on the

inial page for 3 s and slide to the le/right by following the gesture to enter

the admin login page.

DS-K1T642 Series Face Recognion Terminal User Manual