User's Manual

Note
• Only numbers are allowed in the password.
• Up to 8 characters are allowed in the password.
6. Set the user role.
Administrator
The user is the administrator. Except for the normal
aendance funcon, the user can also
enter the Home page to operate
aer authencang the permission.
Normal User
The User is the normal user. The user can only authencate or take aendance on the inial
page.
7. Tap to save the sengs.
6.5.5 Set
Authencaon Mode
Aer adding the user's face picture, ngerprint, password, or other credenals, you should set the
authencaon mode and the user can authencate his/her identy via the congured
authencaon
mode.
Steps
1. Long tap on the inial page for 3 s and slide to the le/right by following the gesture and log in
the backend.
2. Tap User → Add User/Edit User →
Authencaon Mode .
3. Select Device or Custom as the authencaon mode.
Device
If you want to select device mode, you should set the terminal
authencaon mode in
Access Control Sengs page rst. For details see Seng Access Control Parameters.
Custom
You can combine dierent authencaon modes together according to your actual needs.
4. Tap to save the sengs.
6.5.6 Search and Edit User
Aer
adding the user, you can search the user and edit it.
Search User
On the User Management page, Tap to enter the Search User page. Tap Card on the le of the
page and select a search type from the drop-down list. Enter the employee ID, card No., or the user
name for search. Tap
to search.
DS-K1T642 Series Face Recognion Terminal User Manual
28