User's Manual

Import
Click and select the le to import. Click Import to start import conguraon le.
Upgrade
Click Conguraon → System → Maintenance → Upgrade & Maintenance .
Select an upgrade type from the drop-down list. Click and select the upgrade le from your
local PC. Click Upgrade to start upgrading.
Note
Do not power o during the upgrading.
7.4.7 Network Sengs
Set TCP/IP, port, and Wi-Fi parameters.
Set Basic Network Parameters
Enter a short descripon of your concept here (oponal).
Set TCP/IP Parameters
Click Conguraon → Network → Basic Sengs → TCP/IP .
Click Save to save the
sengs.
NIC Type
Select a NIC type from the drop-down list. By default, it is Auto.
DHCP
If uncheck the funcon, you should set the IPv4 address, IPv4 subnet mask, IPv4 default
gateway, MTU, and the device port.
If you check the
funcon, the system will allocate the IPv4 address, IPv4 subnet mask, and the
IPv4 default gateway
automacally.
DNS Server
Set the preferred DNS server and the Alternate DNS server according to your actual need.
Set Wi-Fi Parameters
Set the Wi-Fi parameters for device wireless connecon.
DS-K1T642 Series Face Recognion Terminal User Manual
47