User's Manual

Note
If authencaon is succeeded in the congured me duraon, the device will broadcast the
congured content.
3) Enter the audio content.
4)
Oponal: Repeat substep 1 to 3
5) Oponal: Click to delete the congured me duraon.
5. Click Save to save the
sengs.
7.4.10 Set Video Intercom Parameters
The device can be used as a door staon or outer door staon. You should set the device No.
before usage.
Set Device No.
Click Conguraon → Video Intercom → Device No. .
Click Save to save the sengs aer the conguraon.
Device Type
The device can be used as a door staon or outer door staon. Select a device type from the
drop-down list.
Community No.
Set the device installed community No.
Building No.
Set the device installed building No.
Unit No.
Set the device installed unit No.
Floor No.
Set the device installed
oor No.
No.
When set the device type as Door Staon, if it is a main door staon, you should set the No. as
0. If it is a sub door
staon, you should set the No. as 1.
Note
If you change the No., you should reboot the device.
Set Linked Network Sengs
Click Conguraon → Video Intercom → Linked Network Sengs .
You can set the device type, the SIP server's IP address, and the master staon's IP address.
DS-K1T642 Series Face Recognion Terminal User Manual
49