User's Manual

Table Of Contents

Enter the device password.

Cauon

The password strength of the device can be automacally checked. We highly recommend

you change the password of your own choosing (using a minimum of 8 characters, including

at least three kinds of following categories: upper case leers, lower case leers, numbers,

and special characters) in order to increase the security of your product. And we recommend

you change your password regularly, especially in the high security system, changing the

password monthly or weekly can

beer protect your product.

Proper conguraon of all passwords and other security sengs is the responsibility of the

installer and/or end-user.

5. Oponal: Check Transmission Encrypon (TLS) to enable transmission encrypon using TLS

(Transport Layer Security) protocol for security purpose .

Note

• This

funcon should be supported by the device.

• You can log into the device to get the cercate le by web browser.

6. Check Synchronize Time to synchronize the device me with the PC running the client aer

adding the device to the client.

7. Oponal: Check Import to Group to create a group by the device name.

8. Finish adding the device.

Click Add to add the device and back to the device list page.

Click Add and New to save the

sengs and connue to add other device.

Oponal: Perform the following operaon(s).

Remote

Conguraon

Click on Operaon column to set remote conguraon of the

corresponding device.

Note

For detail operaon steps for the remote conguraon, see the user

manual of the device.

Device Status Click on Operaon column to view device status, including

cameras, recording status, signal status, hardware status, etc.

Edit Device

Informaon

Click on Operaon column to edit the device informaon, such as

IP address, user name, and password.

Check Online User Click on Operaon column to check the online users who access

the device, such as user name, user type, user's IP address, and login

me.

Refresh Click on Operaon column to get the latest device informaon.

DS-K1T642 Series Face Recognion Terminal User Manual