User's Manual

3. Click Add to open the adding person window.
The Person ID will be generated
automacally.
4. Enter the basic
informaon including person name, gender, tel, email address, etc.
5. Oponal: Set the eecve period of the person. Once expired, the credenals and access
control sengs of the person will be invalid and the person will have no authorizaon to access
the
doors\oors.
Example
For example, if the person is a visitor, his/her eecve period may be short and temporary.
6. Conrm to add the person.
-
Click Add to add the person and close the Add Person window.
-
Click Add and New to add the person and
connue to add other persons.
8.4.3 Issue a Card by Local Mode
If a card enrollment staon is available, you can issue a card by local mode. To read the card
number, you should connect the card enrollment staon to the PC running the client by USB
interface or COM, and place the card on the card enrollment
staon.
Steps
1. Enter Person module.
2. Select an
organizaon in the organizaon list to add the person and click Add to enter Add
Person panel.
Note
Enter the person's basic informaon rst. For details about conguring person's basic
informaon, refer to Congure Basic Informaon .
3. In the Credenal → Card area, click +.
4. Click
Sengs to enter the Sengs page.
5. Select Local as the card issuing mode.
DS-K1T642 Series Face Recognion Terminal User Manual
66