User's Manual

3) Click Add to add the person and close the Add Person window, or click Add and New to add
the person and connue to add other persons.
8.4.11 Congure Resident Informaon
If the person is resident, for video intercom purpose, you need to set the room number for
her/him and bind an indoor
staon. Aer bound, you can call this person by calling the indoor
staon and perform video intercom with her/him.
Steps
1. Enter Person module.
2. Select an
organizaon in the organizaon list to add the person and click Add.
Note
Enter the person's basic informaon rst. For details about conguring person's basic
informaon, refer to Congure Basic Informaon .
3. In the Resident Informaon panel, select the indoor staon to bink it to the person.
Note
If you select Analog Indoor Staon, the Door Staon eld will display and you are required to
select the door staon to communicate with the analog indoor staon.
4. Enter the oor No. and room No. of the person.
5. Conrm to add the person.
-
Click Add to add the person and close the Add Person window.
-
Click Add and New to add the person and
connue to add other persons.
8.4.12
Congure Addional Informaon
When adding person, you can congure the addional informaon for the person, such as person's
identy type, identy No., country, etc., according to actual needs.
Steps
1. Enter Person module.
2. Select an
organizaon in the organizaon list to add the person and click Add.
Note
Enter the person's basic informaon rst. For details about conguring person's basic
informaon, refer to Congure Basic Informaon .
3. In the Addional Informaon panel, enter the addional informaon of the person, including
person's ID type, ID No., job
tle, etc., according to actual needs.
4. Conrm to add the person.
-
Click Add to add the person and close the Add Person window.
DS-K1T642 Series Face Recognion Terminal User Manual
73