User's Manual

Table Of Contents
5. In the
le list of the Select Person eld, select person(s) and the person(s) will be added to the
selected list .
6. In the le list of the Select Door eld, select door(s) or door staon(s) for the selected persons
to access, and the selected door(s) or door staon(s) will be added to the selected list.
7. Click OK.
8.
Aer adding the access groups, you need to apply them to the access control device to take
eect.
1) Select the access group(s) to apply to the access control device.
To select
mulple access groups, you can hold the Ctrl or Shi key and select access groups.
2) Click Apply All to Devices to start applying all the selected access group(s) to the access
control device or door
staon.
Cauon
Be careful to click Apply All to Devices, since this
operaon will clear all the access groups
of the selected devices and then apply the new access group, which may brings risk to the
devices.
You can click Apply Changes to Devices to only apply the changed part of the selected
access group(s) to the device(s).
3) View the apply status in the Status column or click Applying Statusto view all the applied
access group(s).
The selected persons in the applied access groups will have the
authorizaon to enter/exit the
selected doors/door staons with their linked card(s) or ngerprints.
9. Oponal: Click to edit the access group if necessary.
8.7
Congure Advanced Funcons
You can congure the advanced funcons of access control to meet some special requirements in
dierent scene.
Note
For the card related
funcons(the type of access control card), only the card(s) with access group
applied will be listed when adding cards.
The advanced funcons should be supported by the device.
Hover the cursor on the Advanced
Funcon, and then Click to customize the advanced
funcon(s) to be displayed.
8.7.1 Congure Device Parameters
Aer adding the access control device, you can congure the parameters of access control device,
access control points.
DS-K1T642 Series Face Recognion Terminal User Manual
82