User's Manual

Figure 4-15 Exit Buon Wiring (Exit)
Note
●
The f
ace recognion devices are powered via 12 VDC power output interface of the main and
sub lane control board.
●
Barrier open at the entrance: connect to BTN1 and GND.
●
Barrier open at the exit: connect to BTN2 and GND.
4.4 Device Sengs
You can congure
the device via buon on the main lane control board or the DIP switch on the
access control board.
Funcon Main Lane Control Board & Access Control
Boar
d & Loudspeaker (Oponal)
Working Mode
Normal/Study Mode Congure via buon (refer to
Set Study Mode
via Buon )
Congure
via DIP switch (refer to
Set Study
Mode )
V
oice prompt (can be disabled)
keyfob Pairing Congure via buon (refer to
Pair Keyfob via
Buon )
Congure
via buon (refer to
Pair Keyfob
)
Passing Mode Congure via buon/web
Memory Mode Congure via buon/web
Parameter Sengs
Barrier Opening Speed Congure via buon/web
Barrier Closing Speed Congure via buon/web
DS-K3B220X Series Swing Barrier User Manual
22