User's Manual

Figure 6-13 keyfob
2.
Vie
w the keyfob working status.
3.
Set Working Mode as One-to-One or One-to-Many.
4.
Add keyfob.
1) Click Add and the keyfob adding window will pop up.
2) Enter the Name and Serial No..
3) Check to enable Remain Open Permission at your actual needs.
4) Click OK to add the keyfob.
5.
Oponal: Select a k
eyfob and click Delete to delete the keyfob.
6.
Click Save.
IR Detector
Set IR detector.
St
eps
1.
Click Conguraon → Turnsle → IR Detector to enter the page.
Figure 6-14 IR Detector
2.
Se
t the entrance and exit inducve mode as Single Triggered or Triggered Simultaneously.
3.
Set custom IR detector mode.
Enable IR Emergency Mode
If some IR beams do not work properly, you can shield those IR beams to restore the lane. But
this acon may hit person and cause injury.
DS-K3B220X Series Swing Barrier User Manual
51