User's Manual

Enable Custom An-pinch for Door Closing
An-pinch for door closing refers that the barrier will not close if the device has detected
person in the lane. Only aer the person walks out of the lane, the barrier will close. If you
enable the funcon, you can shield parts of the IR beams for closing barrier in advance. But
this acon may hit person and cause injury.
4.
Click Sa
ve.
People
Counng
Set people counng .
Steps
1.
Click Conguraon → Turnsle → People Counng to enter the page.
Figure 6-15 People Counng
2.
Check t
o enable People Counng.
3.
EnableDevice Oine People Counng at your actual needs.
4.
Select People Counng Type as Invalid, Passing Detecon or Authencaon Number.
5.
Oponal: Click clear t
o clear all the people counng informaon.
Other Sengs
Set other parameters.
Steps
1.
Click Conguraon → Turnsle → Other Sengs to enter the page.
2.
Se
t Alarm Output Duraon.
DS-K3B220X Series Swing Barrier User Manual
52