User's Manual

Note
The alarm output duraon ranges from 0 s to 3599 s.
3.
Se
t Temperature Unit.
4.
Check to enable Do Not Open Barrier When Lane is Not Clear.
5.
Drag the block or enter the value to adjust the light board brightness.
6.
Set the alarm buzzer beeping duraon, door closing delay me, max. intrusion duraon,
overstaying duraon and max. IR obstructed duraon.
7.
Check to enable Memory Mode at your actual needs.
Note
Mulple cards presenng for mulple person passing is allowable when enabling the memory
mode. When the passing per
son's number exceeds the card presenng number, or aer the
latest person passing with no other person passing within the door open duraon, the door will
close automacally.
8.
Choose the c
ontrol mode.
So Mode
The barrier will be closed aer the person has passed through the barrier when there are
tailing, forced accessing, etc.
Guard Mode
The barrier will be closed immediately when there are tailgang, forced accessing, etc.
9.
Se
t the re input type.
10.
Click to enable Motor Self-Test and choose the main lane or sub lane to start motor self-
tesng.
11.
Click Sa
ve.
6.5.11 Card Sengs
Set Card Security
Click Conguraon → Card Sengs → Card Type to enter the sengs page.
DS-K3B220X Series Swing Barrier User Manual
53