User's Manual

Figure 8-8 Set Authencaon Parameters
Click Sa
ve to save the sengs aer the conguraon.
Terminal
Choose Entrance or Exit for sengs.
Enable Authencaon Device
Enable the authencaon
funcon.
Connuous Recognion Interval
You can set the interval between 2 connuous recognion of a same person during the
authencaon. In the congured interval, Person A can only recognized once. If another person
(P
erson B) has recognized during the interval, Person A can recognized again.
Note
The
recognion internal value ranges from 1 to 10.
Authencaon
Select an
authencaon mode according to your actual needs from the drop-down list.
Authencaon Interval
Y
ou can set the authencaon interval of the same person when authencang. The same
person can only authencate once in the congured interval. A second authencaon will be
failed.
Alarm of Max. Failed Aempts
Enable to report alarm when the card reading aempts reach the set value.
Max. Authencaon Failed Aempts
DS-K3B631TX Series Swing Barrier User Manual
56