Quick Start Guide
Table Of Contents
- Legal Information
- Regulatory Information
- Safety Instruction
- Available Models
- Chapter 1 Overview
- Chapter 2 System Wiring
- Chapter 3 Installation
- Chapter 4 General Wiring
- 4.1 Components Introduction
- 4.2 Wiring Electric Supply
- 4.3 Wire Interconnecting Cable
- 4.4 Face Recognition Terminal Power Supply Wiring (Optional)
- 4.5 Terminal Description
- 4.5.1 UART Related Terminal and Position
- 4.5.2 Main Control Board Terminal Description
- 4.5.3 Sub Control Board Terminal Description
- 4.5.4 BUS Terminal Description
- 4.5.5 Access Control Board Terminal Description
- 4.5.6 Access Control Board UART Description
- 4.5.7 RS-485 Wiring
- 4.5.8 RS-232 Wiring
- 4.5.9 Barrier Control Wiring
- 4.5.10 Alarm Output Wiring
- Chapter 5 Device Settings
- Chapter 6 Activation
- Appendix A. DIP Switch Description
- Appendix B. Event and Alarm Type
- Appendix C. Table of Audio Index Related Content
- Appendix D. Error Code Description
- Appendix E. Communication Matrix and Device Command
Figure 4-8 UART No. Descripon
Table 4-1 UART Related Posion/Terminals/DIP Switch Introducon
UART No. Related Terminals Terminal Posion DIP Switch No. Funcon
UART1
Note
External card
r
eader is
recommended to
access.
485A/232A BUS of Main Lane
Con
trol Board
1 to 3 ON: UART1 is RS-
232A Interface
4 to 6 ON: UART1 is RS-
485A Interface
7 Reserved
8 Reserved
UART3 485C+/232C+ Access Control
Boar
d
1 to 3 ON: UART3 is RS-
232C Interface
DS-K3Y411X Series Flap Barrier Quick Start Guide
19