Quick Start Guide
Table Of Contents
- Legal Information
- Regulatory Information
- Safety Instruction
- Available Models
- Chapter 1 Overview
- Chapter 2 System Wiring
- Chapter 3 Installation
- Chapter 4 General Wiring
- 4.1 Components Introduction
- 4.2 Wiring Electric Supply
- 4.3 Wire Interconnecting Cable
- 4.4 Face Recognition Terminal Power Supply Wiring (Optional)
- 4.5 Terminal Description
- 4.5.1 UART Related Terminal and Position
- 4.5.2 Main Control Board Terminal Description
- 4.5.3 Sub Control Board Terminal Description
- 4.5.4 BUS Terminal Description
- 4.5.5 Access Control Board Terminal Description
- 4.5.6 Access Control Board UART Description
- 4.5.7 RS-485 Wiring
- 4.5.8 RS-232 Wiring
- 4.5.9 Barrier Control Wiring
- 4.5.10 Alarm Output Wiring
- Chapter 5 Device Settings
- Chapter 6 Activation
- Appendix A. DIP Switch Description
- Appendix B. Event and Alarm Type
- Appendix C. Table of Audio Index Related Content
- Appendix D. Error Code Description
- Appendix E. Communication Matrix and Device Command
Access Control Board Terminal Descripon
D1 controls the
door opening
for ordinary
entrance, and
D2 controls the
door opening
for ordinary
exit.
D2- Door 2 Relay Output (Dry Contact) If necessary,
the door lock
relay can be
used to control
the third-party
barrier switch.
D1 controls the
door opening
for ordinary
entrance, and
D2 controls the
door opening
for ordinary
exit.
D2+
Alarm Output NO/NC1 Alarm Output Relay 1 (Dry Contact) The alarm
output
supports switch
output.
COM1
NO/NC2 Alarm Output Relay 2 (Dry Contact) The alarm
output
supports switch
output.
COM2
Loudspeaker / Connect to loudspeaker /
Network Interface LAN Network Accessing /
Fire Input XF Fire input /
G Grounding
DS-K3Y411X Series Flap Barrier Quick Start Guide
29