Quick Start Guide
Table Of Contents
- Legal Information
- Regulatory Information
- Safety Instruction
- Available Models
- Chapter 1 Overview
- Chapter 2 System Wiring
- Chapter 3 Installation
- Chapter 4 General Wiring
- 4.1 Components Introduction
- 4.2 Wiring Electric Supply
- 4.3 Wire Interconnecting Cable
- 4.4 Face Recognition Terminal Power Supply Wiring (Optional)
- 4.5 Terminal Description
- 4.5.1 UART Related Terminal and Position
- 4.5.2 Main Control Board Terminal Description
- 4.5.3 Sub Control Board Terminal Description
- 4.5.4 BUS Terminal Description
- 4.5.5 Access Control Board Terminal Description
- 4.5.6 Access Control Board UART Description
- 4.5.7 RS-485 Wiring
- 4.5.8 RS-232 Wiring
- 4.5.9 Barrier Control Wiring
- 4.5.10 Alarm Output Wiring
- Chapter 5 Device Settings
- Chapter 6 Activation
- Appendix A. DIP Switch Description
- Appendix B. Event and Alarm Type
- Appendix C. Table of Audio Index Related Content
- Appendix D. Error Code Description
- Appendix E. Communication Matrix and Device Command
No. Device Mode UART No. Funcon Binary Value
Prohibit Entrance
and Controlled
Exit
Prohibit Entrance
and Fr
ee Exit
DIP B 1 to 3 UART 5 ON: UART 5 is RS-
232E In
terface
/
4 to 6 ON: UART 5 is RS-
485E Interface
/
7 / Reserved /
8 / Default is OFF. You
can dial to ON for
inial operaon
/
DIP C 1 to 3 UART 6 ON: UART 6 is RS-
232F In
terface
/
4 to 6 ON: UART 6 is RS-
485F In
terface
/
7 / Reserved /
8 / Reserved /
DIP D 1 to 3 UART 1 ON: UART 1 is RS-
232A Interface
/
4 to 6 ON: UART 1 is RS-
485A Interface
/
7 / Reserved /
8 / Reserved /
DIP E 1 to 3 UART 3 ON: UART 3 is RS-
232C Interface
/
4 to 6 ON: UART 3 is RS-
485C Interface
/
7 / Reserved /
8 / Reserved /
DS-K3Y411X Series Flap Barrier Quick Start Guide
34