User's Manual

Steps
Note
The person schedule has the higher priority than department schedule.
1. Click Time & Aendance → Shi Schedule t
o enter the Shi Schedule Management page.
2. Click Person Schedule to enter Person Schedule page.
3. Select the organizaon and select the person(s).
4. Select the shi from the drop-down list.
5. Check the checkbo
x to enable Mulple Shi Schedules.
Note
Aer checking the Mulple
Shi Schedules, you can select the eecve metable(s) from the
added metables for the persons.
Mulple Shi Schedules
It contains more than one metables. The person can check in/out in any of the metables
and the aendance will be eecve.
If the mulple shi schedules contains three metables: 00:00 to 07:00, 08:00 to 15:00 and
16:00 to 23:00. The aendance of the person adopng this mulple shi schedules will be
eecve
in any of the three metables. If the person checks in at 07:50, it will apply the
nearest metable 08:00 to 15:00 to the person's aendance.
6. Se
t the start date and end date.
7. Set other parameters for the schedule, including Check-in Not Required, Check-out Not
Required, Eecve for Holiday, and Eecve for Overme.
8. Click Save.
Set Temporary Schedule
You can add a temporary schedule for the person and the person will be assigned with the shi
schedule temporarily. You can also view and edit the temporary schedule details.
Be
fore You Start
Add department and person in Person module. See Person Management for details.
Steps
Note
The temporary schedule has higher priority than department schedule and person schedule.
1. Click Time &
Aendance → Shi Schedule to enter the Shi Schedule Management page.
2. Click Temporary Schedule to enter Temporary Schedule page.
3. Select the organizaon and select the person(s).
4. Click one da
te or click and drag to select mulple dates for the temporary schedule.
DS-K3Y501 Flap Barrier User Manual
92