User's Manual

Cauon
The password strength of the device can be automacally checked. We highly recommend
y
ou change the password of your own choosing (using a minimum of 8 characters, including
at least three kinds of following categories: upper case leers, lower case leers, numbers,
and special characters) in order to increase the security of your product. And we recommend
you reset your password regularly, especially in the high security system, reseng the
password monthly or weekly can beer protect your product.
Proper conguraon of all passwords and other security sengs is the responsibility of the
installer and/or end-user.
7. Oponal: Check S
ynchronize Time to synchronize the device me with the PC running the client
aer adding the devices to the client.
8. Oponal: Check Import to Group to create a group by the device name.
Note
You can import all the channels of the device to the corresponding group by default.
9. Click OK t
o add the devices.
Add Device by IP Address or Domain Name
When you know the IP address or domain name of the device to add, you can add devices to the
client by specifying the IP address (or domain name), user name, password, and other related
parameters.
Steps
1. Enter Device Management module.
2. Oponal: Click
on the right of De
vice Management and select Device.
The added devices are displayed in the list.
3. Click Add to open the Add window.
4. Select IP/Domain as the adding mode.
5. Enter the required informaon, including name, address, port number, user name, and
pass
word.
Name
Create a descripve name for the device. For example, you can use a name that can show
the
locaon or feature of the device.
Address
The IP address or domain name of the device.
Port
The devices to add have the same port No. The default value is 8000.
User Name
DS-K3Y501 Flap Barrier User Manual
33